Controllers

 

 

                                   

 

PTC Photo Controllers

$ 72.95

PTC-1

 

PTC-2

 

The PTC series of photo controllers are perfect when you need to turn something ON only during daylight hours or only at night. A photocell senses whether it is day or night, and turns the device plugged into it On or OFF depending on which model you are using. The PTC-1 turns ON whatever is plugged into it during the "day" when the lights are on. The PTC-2 turns ON the device during the "night", when the lights are off. PTC(s) are rated for 10 amps @ 120 volts.

 

 

PPM-2A - "The Fuzzy"

 $ 689.95
-  103.49
                   $  586.46  Sale Price

  

People who need the absolute best CO2 controller available today, use the PPM-2a from C.A.P. What sets the PPM-2a apart from the competition? Fuzzy Logic(tm)... Fuzzy Logic(tm) can be compared to a good driver. As a good driver approaches a red light, he or she applies the brakes to gradually slow down BEFORE getting to the intersection. Fuzzy Logic(tm) uses the same idea to bring the CO2 level up to the desired setting without over-shooting the desired CO2 level. The PPM-2a automatically "dials-in" the exact parameters for your area. It learns how your grow area uses CO2 and adapts to keep the CO2 levels constant. The PPM-2a can be connected to a temperature or environmental controller, disabling the CO2 function while your exhaust fans are running to reduce CO2 waste. The PPM-2a is capable of being used to control both compressed CO2 and gas-burning CO2 generators. When used with a CO2 generator, the user can change the PPM-2a mode to ON / OFF control which eliminates the rapid cycling of the CO2 generator. The PPM-2a will control any make of CO2 valve or generator that is 120 volts.

 

 

PPM-3 CO2 Monitor/Controller

$ 499.95
 

 

The PPM-3 from C.A.P. is the most affordable and simple CO2 controller available. Its' proven technology is very accurate at measuring levels of Carbon Dioxide in your growing area from 0 to 5000 ppm (Parts-Per-Million). Using the PPM-3 is quite simple. Just plug your CO2 device (CO2 valve or generator) into the "piggyback" cord and it will automatically maintain the CO2 level that you specify. The PPM-3 works with any make of CO2 valve or generator that is 120 volt.

 

 

AIR-4 Temperature/Humidity CO2 Controller

$ 249.95
 

 

The AIR-4 has all the features of the AIR-3 with the addition of independent temperature and humidity controls. It also has an increased power capacity to control up to 15 amps of equipment. An additional outlet is provided which will power equipment only during the 'day' cycle. Features include independent temperature and humidity control, coordinated CO2 sequencing and an additional outlet that is powered only while the lights are on. The AIR-4 is rated for 15 amps @ 120 volts.
 

 

 

HLC-1 Heating Thermostat

$ 84.95
 

 

The HLC-1 allows you to control the temperature within your growing environment. Just connect your heating equipment, then set the temperature that you wish to maintain. If the temperature falls below your setting, the outlet on the front is activated. The HLC-1 can also be used as a high temperature shutdown by plugging your lights into the outlet and setting the maximum temperature that your growing environment can sustain. If this setting is exceeded, your lights will turn off. Comes with a 3' remote sensor. The HLC-1 is rated for 15 amps @ 120 volts.
 

 

 

 

C.A.P. MLC-4
 

$ 207.95
 

 

The MLC-4 Master Lighting Controller is the best device for controlling up to four HID lights from one time-clock or controller. You run 30 amp, 240 volt power into the MLC-4, and all of the outlets are controlled by one 120 volt "trigger cable". You can plug the "trigger cable" into a standard 24 hour timer or lighting controller. The MLC-4 features four standard 240 volt style (NEMA 6-15) outlets, which your ballasts are plugged into. The MLC-4's are rated for 30 amps @ 240 volts.
 

 

 

CGC-1 Complete Greenhouse Controller

$ 619.95
 

  

The CGC-1 Complete Greenhouse Controller controls all of the main devices required in today's modern hydroponic garden. Your garden's HID lights are controlled by a precision 24-hour time clock. Two outlets are provided for your lights. Other functions such as supplemental CO2 and hydroponic pumps are also coordinated with the time clock. Two of the outlets on the CGC-1 are for your exhaust fans or air conditioner. A built-in thermostat and humistat handle the growing area's temperature and humidity control functions. The two pump outlets allow your water pumps to be controlled by the built in Adjustable Recycling Timer. A selector switch allows the user to determine if the hydroponic pumps are to cycle only when the lights are ON or 24 hours a day. An auxiliary NIGHT outlet is activated when the lights are turned off. It is perfect for controlling humidity at night using a dehumidifier or for a separate heater. Supplemental CO2 is coordinated to work in harmony with your exhaust fan's temperature and humidity control functions. When the exhaust fans are running, the CO2 outlet is disabled to conserve CO2. Two standard built in timers control your CO2 valve or generator. The CGC-1 can be upgraded to Part Per Million accuracy by plugging in the PPM-1c CO2 monitor. The CGC-1 is rated for 15 amps @ 120 volts.

 

 

C.A.P. XGC-1 Xtreme Greenhouse Controller

$ 1124.95
 

The XGC-1 is the best all in one controller ever made. The specifications of the XGC-1 are identical in every way to the CGC-1, except for the addition of Fuzzy Logic(tm) CO2 control built in! Fuzzy Logic(tm) can be compared to a good driver. As a good driver approaches a red light, he or she applies the brakes to gradually slow down BEFORE getting to the intersection. Fuzzy Logic(tm) uses the same idea to keep the CO2 level at your desired setting, without going over the set point..

Back to Accessories